Aircraft Disinsection in Redmond, OR: Roberts Field (RDM)
Roberts Field is the front door to Central Oregon, hauling skiers, climbers, and new residents into the high desert. We handle pre-embarkation disinsection at RDM for every flight whose destination country demands it.
If your next departure from RDM is to a country that requires disinsection, we come to your aircraft here, treat it empty before boarding to the WHO pre-embarkation method, and issue the certificate for the flight. Book 36 to 48 hours ahead for Redmond; booked departures are guaranteed for the date.
About Roberts Field
Roberts Field is Central Oregon’s airline airport, serving Bend, Redmond, and a high desert region that has boomed with outdoor recreation and remote-work migration. Flights to West Coast hubs and beyond use a 7,038-ft runway with the Cascades standing on the western horizon. Ski season at Mount Bachelor and summer river and trail traffic keep the leisure flow strong in both directions.
On the field at RDM
RDM lies one mile southeast of Redmond, Oregon, 3,082 feet above sea level. The main runway, 05/23, is 7,038 feet of asphalt; the field has 3 runways in all. RDM is towered and holds a Part 139 airport operating certificate. The FBO choices at RDM include Skyservice FBO Redmond. We work at the ramp or hangar your crew is using. Nothing repositions: the aircraft is treated where it sits, before boarding, and leaves with the certificate.
Where the aircraft disinsection requirement comes from
The requirement belongs to the country you are flying to, and it is met at the last port before that country. Leave Redmond non-stop and RDM is that port, so pre-embarkation treatment of the empty aircraft here, before boarding, satisfies the destinations that accept the method. Add a stop and the picture changes; tell us the routing and we will place the treatment correctly.
From RDM the requirement is mostly a Pacific one: Australia and New Zealand require disinsection on every arriving international aircraft, and the Cook Islands, Fiji and the Solomon Islands require it too. Many itineraries from Redmond stop in Hawaii, which then becomes the last US port and the place for pre-embarkation treatment; non-stop departures are treated here at RDM. Australia, New Zealand, Chile, French Polynesia appear on the list as well.
The aircraft disinsection process on the RDM ramp
At Roberts Field the treatment fits into the normal departure sequence. Catering and cleaning finish, the cabin is confirmed empty, and our technician applies the WHO pre-embarkation treatment through cabin, flight deck and holds. The aircraft rests, ventilates for the required wait, and is released for boarding with the certificate aboard and the treatment details in the crew’s hands for the General Declaration.
RDM at a glance
| Airport | Roberts Field |
|---|---|
| IATA | RDM |
| ICAO | KRDM |
| Location | Redmond, Oregon |
| Main runway | 7,038 ft asphalt (05/23) |
| Elevation | 3,082 ft |
| FBOs | Skyservice FBO Redmond |
| Region | West Coast |
| Typical disinsection destinations | Cook Islands, Australia, New Zealand, Chile, French Polynesia |
| Treatment | Pre-embarkation, empty aircraft, before boarding, at your FBO or hangar |
| Reviewed | October 2026 |
Countries that require disinsection, served from RDM
From RDM: Cook Islands, Australia, New Zealand, Chile, French Polynesia, and the rest of the destinations we serve. The full table of aircraft disinsection requirements by country covers every destination we have verified for RDM departures. Australia and New Zealand carry operator paperwork we help with; if either is on a Redmond itinerary, start early.
Tell us your route and we will confirm exactly what your aircraft needs.
Destination, departure airport, dates. We confirm the requirement, come to the aircraft, and handle the certificate.
RDM disinsection questions, answered
Do you perform disinsection at Roberts Field?
Yes. RDM is one of the US departure airports we come to. The treatment happens at your aircraft, in the hangar or on the FBO ramp, timed to your boarding, and the certificate is issued on the spot.
Does a flight from RDM to Cook Islands need disinsection?
Yes, Cook Islands requires it on arriving aircraft, and pre-embarkation treatment at RDM before boarding is a method it accepts for a non-stop flight. Australia, New Zealand, Chile, French Polynesia are other common cases from Redmond. Send us the route and we will confirm the plan.
How much notice do you need for a departure from RDM?
We can often accommodate short-notice requests at RDM. Send us the destination and date as soon as the trip is likely and we will plan the treatment at Redmond around your boarding.
Our trip out of RDM has a technical stop before the destination. Does that change things?
Yes, because pre-embarkation belongs at the last port before the destination country. Send us the full routing from RDM and we will confirm where the treatment should be performed and whether it can be done in the US.
Do you also serve other airports near Redmond?
Yes. In the West Coast we also come to Hollywood Burbank Airport (BUR), John Wayne Airport (SNA), San Diego International Airport (SAN), San Francisco International Airport (SFO), Oakland International Airport (OAK), San José Mineta International Airport (SJC), and to any other US airport your aircraft departs from.
Nearby departure airports
- Hollywood Burbank AirportBUR
- John Wayne AirportSNA
- San Diego International AirportSAN
- San Francisco International AirportSFO
- Oakland International AirportOAK
- San José Mineta International AirportSJC
← All US departure airports · Aircraft disinsection in Oregon